Sheet bend
Also called: Weaver's knot
Joins two ropes or lines, also of different size or material.
- Use
- Boat and kayak
- Lines
- Rope
- Difficulty
- Easy
White: the standing part. Orange: the end you work with. Mirror flips the drawing for tying left-handed.
Steps
Make a bight in the end of the thicker line and hold it.
Pass the end of the other line up through the bight from underneath.
Take it round behind both legs of the bight.
Tuck it under its own standing part, across the front of the bight, not through it.
Hold the bight and pull the other line to tighten. Both short ends should finish on the same side.
Tips
- Make the bight in the thicker or stiffer line.
- It joins lines of different size or material.
- It holds better than a square (reef) knot.
Sources
Each step was checked against these written guides:
- Scout Life, How to tie the 7 basic Scout knots
- SAIL magazine, 7 essential knots for sailors
- Fly Fisherman, The best fly fishing knots
Drawings and animation by Fishwake. We give no breaking-strength figures: published numbers differ with the line and the test.
