PR bobbin knot
Also called: PR knot
A slim, strong join of braid to a heavy leader, tied with a bobbin.
- Use
- Line to line and leaders
- Lines
- Braid, Monofilament, Fluorocarbon
- Difficulty
- Hard
White: one line. Grey: the other line. Orange: the tag end being tied. Mirror flips the drawing for tying left-handed.
Steps
Load the braid onto a PR bobbin, leaving a long free end. Lay the leader against the braid with about 25 cm of overlap and pinch them.
Swing the bobbin round the leader in a loose, open spiral, about 10 turns.
Reverse, and let the bobbin's weight lay tight turns back over the spiral until 5 to 8 cm is covered. Keep the leader from spinning.
Cut the braid from the bobbin and lock the turns with half hitches round the leader.
Trim the leader's tag end and cover it with more hitches. Melt the leader stub into a small bump, or add a drop of glue, if you like.
Tips
- You need a bobbin tool to tie it.
- Tie it at home before the trip.
Sources
Each step was checked against these written guides:
Drawings and animation by Fishwake. We give no breaking-strength figures: published numbers differ with the line and the test.
